design of waste heat recovery system for an internal combustion engine – Bing

(PDF) Waste heat recovery systems for internal combustion …

A major part of the heat supplied in an internal combustion engine is not realized as work output, but dumped into the atmosphere as waste heat. If this waste heat energy is tapped and converted into usable energy, the overall efficiency of AN engine can be improved.

Review of organic Rankine cycles for internal combustion …

The largest portions of waste heat from internal combustion engines are lost through the high- and medium-temperature engine exhaust and coolant, respectively. Studies show that the higher exergy level of engine exhaust allows more efficient heat recovery; however, preheating a WHR system’s working fluid using engine coolant energy can also be desirable [51] , [56] .

  • Cited by: 385

    Waste Heat Recovery

    • Waste heat recovery (WHR) is the use of thermal energy that would otherwise be transferred to the environment to accomplish a useful function. In many cases, WHR avoids or reduces the need for additional fuel energy input. Examples for internal combustion engines include: 1. Use of engine coolant for cabin heat 2. Turbocharging to increase power density 3. Bottoming cycles to produce additional work from exhaust gas 4. Integrated Exhaust Manifold to facilitate engine warm-upThe main pathways…

      Technologies to recover exhaust heat from internal …

      Waste heat recovery entails capturing and reusing the waste heat from internal combustion engine and using it for heating or generating mechanical or electrical work. It would also help to recognize the improvement in performance and emissions of the engine if these technologies were adopted by the automotive manufacturers.

      • Cited by: 341

        Review of Waste Heat Recovery Mechanisms for Internal …

         · PDF file

        waste heat recovery (WHR) techni ques include turbocharging, turbo compounding, Rankine engine compounding, and thermoelectric (TE) generators. These techniques have shown increases in engine thermal efficiencies that range from 2% to 20%, depending on sys-tem design, quality of energy recovery, component efficiency, and implementation.

        • Published in: Journal of Thermal Science and Engineering Applications · 2014Authors: John R Armstead · Scott A MiersAffiliation: Michigan Technological UniversityAbout: Rankine cycle · Heat recovery ventilation · Coolant

          Waste Heat Recovery from Combustion Engines based on the …

           · PDF file

          Most of the energy in the fuel burned in modern automotive internal combustion engines is lost as waste heat without contributing to the vehicle’s propulsion. In principle some of this lost energy could be captured and used to increase the vehicle ’s fuel efficiency by fitting a …

          • Authors: Gunnar LatzAbout: Waste heat recovery unit · Propulsion · Efficient energy use · Rankine cycle

            Theoretical Analysis of Waste Heat Recovery from an …

            3/4/2006 · Theoretical Analysis of Waste Heat Recovery from an Internal Combustion Engine in a Hybrid Vehicle 2006-01-1605 This paper presents a theoretical study of different strategies of waste heat recovery in an internal combustion engine, operating in a …

            • Cited by: 117

              Review of Waste Heat Recovery Mechanisms for Internal …

              Promising waste heat recovery (WHR) techniques include turbocharging, turbo compounding, Rankine engine compounding, and thermoelectric (TE) generators. These techniques have shown increases in engine thermal efficiencies that range from 2% to 20%, depending on system design, quality of energy recovery, component efficiency, and implementation.

              • Cited by: 22

                An Engine System Approach to Exhaust Waste Heat Recovery

                 · PDF file

                An Engine System Approach to Exhaust Waste Heat Recovery Principal Investigator: Richard W. Kruiswyk Caterpillar Inc. … of an internal combustion engine and … An Engine System Approach to Exhaust Waste Heat Recovery

                US10378390B2 – Internal combustion engine system with heat …

                An internal combustion engine system with heat recovery includes an internal combustion engine with a waste heat passage, an electric motor, a heat recovery assembly including a working fluid circulation circuit with a working fluid, a first heat source which is adapted to be heated by the waste heat passage and adapted to heat the working …

                • Cited by: 2

                  Internal combustion engine – Wikipedia

                  • An internal combustion engine is a heat engine where the combustion of a fuel occurs with an oxidizer in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine. The force is applied typically to pistons, turbine blades, rotor or a nozzle. This force moves the component over a distance, transforming ch

                    Design and Fabrication of Heat Exchanger for Waste Heat …

                    Internal combustion (IC) engine is one of the most important prime movers driving many of the automobiles today. … Design and Fabrication of Heat Exchanger for Waste Heat Recovery from Exhaust Gas of Diesel Engine. … The model is developed for temperature and vapour quality prediction and for control design of the waste heat recovery system.

                    • Cited by: 1

                      A COMPREHENSIVE STUDY ON WASTE HEAT RECOVERY FROM …

                       · PDF file

                      Key words: internal combustion engine, waste heat recovery, organic Rankine cycle, configuration, parametric optimization Introduction Considering the climate change and the shortage of non-renewable energy resources, the interests in waste heat recovery has …

                      • Published in: Thermal Science · 2013Authors: Mojtaba Tahani · Saeed Javan · Mojtaba BiglariAbout: Waste heat recovery unit · Organic Rankine cycle · Internal combustion engine

                        DESIGN AND DEVELOPMENT OF ECO-FRIENDLY ALCOHOL …

                         · PDF file

                        Abstract :- The present paper discusses the design and development of an eco-friendly alcohol engine fitted with the waste heat recovery system as a remedial alternative to the existing commonly used internal combustion engine. With the present trends in Internal combustion engines, many improvements have been made.

                        • Authors: G Vijayan Iyer · Nikos E MastorakisAffiliation: All India Council For Technical Education

                          Technologies for Waste Heat Energy Recovery from Internal …

                          Energy recovery in the marine sector mainly focused in slow and large two or four stroke diesel engine. Therefore the main objective of this paper is to review each waste heat recovery technology based on latest developments, research trends and feasibility of adopting it …

                          PAPER OPEN ACCESS A Study of Exhaust Waste Heat Recovery …

                           · PDF file

                          field design in automotive waste heat recovery in order to improve the internal combustion engine efficiency. 1. Introduction Recently, internal combustion engine has been considered as the major power sources for worldwide applications such as industry, transportation in over the world. However, the energy crisis and

                          • Author: Quang Khong Vu, Dien Vu Minh, Tien Nguyen Duy, Tuan Pham Minh

                            Rankine Cycle Waste Heat Recovery

                            1/6/2018 · Abstract: Heat rejected from an internal combustion engine, such as through the EGR cooler or the tailpipe, reflects a significant loss of efficiency. Some of the wasted heat may be recovered using the Rankine cycle, where an intermediate heat transfer loop is added that contains a working fluid whose properties allow it to pass through an expander to capture some of the exergy of the waste …

                            Waste Heat Recovery from Combustion Engines based on the …

                             · PDF file

                            Waste Heat Recovery from Combustion Engines based on the Rankine Cycle GUNNAR LATZ … 5 Model of the heat recovery system … the internal combustion engine will by themselves be capable of meeting future transportation needs in a sustainable fashion …

                            • Authors: Gunnar LatzAbout: Waste heat recovery unit · Propulsion · Efficient energy use · Rankine cycle

                              Brayton cycle for internal combustion engine exhaust gas …

                               · PDF file

                              wasted energy, thus increasing the engine efficiency and lowering fuel consumption and contamination. Waste heat recovery for internal combustion engine exhaust gases using Brayton cycle machine was investigated. The principle prob-lems of application of such a system in a passenger car were considered: compressor and expander machine selection,

                              Review of Waste Heat Recovery Mechanisms for Internal …

                              Promising waste heat recovery techniques include turbocharging, turbo compounding, Rankine engine compounding, and thermoelectric generators. These techniques have shown increases in engine thermal efficiencies that range from 2% to 20%, depending on system design, quality of energy recovery, component efficiency, and implementation.

                              • Cited by: 4

                                A review of turbocompounding as a waste heat recovery …

                                A review of turbocompounding as a waste heat recovery system for internal combustion engines Aghaali, Habib KTH, School of Industrial Engineering and Management (ITM), Machine Design (Dept.), Internal Combustion Engines.

                                • Published in: Renewable & Sustainable Energy Reviews · 2015Authors: Habib Aghaali · Hanserik AngstromAffiliation: Royal Institute of TechnologyAbout: Internal combustion engine · Waste heat recovery unit

                                  Design and Fabrication of Silencer Waste Heat Power …

                                   · PDF file

                                  the engine in the form of heat. As a huge amount of energy is lost, there is urgent need to design a advice to trap this loss.This paper proposes and implements a waste heat recovery system using a thermoelectric generator (TEG) designed for four stroke I.C. engine. The system converts the waste

                                  Combined Organic Rankine Cycle With Double Modes Used for …

                                  A Combined Organic Rankine Cycle With Double Modes Used for Internal Combustion Engine Waste Heat Recovery Guohui Zhu. … Design and Testing of an Algebraic Scroll Expander for Power Generation From a Waste Heat … Parametric and Exergetic Analysis of Waste Heat Recovery System Based on Thermoelectric Generator and Organic Rankine Cycle …

                                  • Cited by: 1

                                    Design and optimization of an Internal Combustion Engine …

                                     · PDF file

                                    Design and optimization of an Internal Combustion Engine Heat recovery system using a Thermoelectric Generator D. Chalet1, A. Nour Eddine1 2, L. Aixala 2, X. Faure 1 Ecole Centrale de Nantes 2 CEA Rencontre Utilisateurs GT Simulation système 0D/1D 17th May 2017

                                    Special Issue "Internal Combustion Engine Waste Heat Recovery"

                                    The Guest Editor is inviting submissions to a Special Issue of Energies on the subject area of "Internal Combustion Engine Waste Heat Recovery". Internal combustion engines operating on fossil fuel consume about 70% of the world’s oil production, thereby producing about 10% of the world’s carbon dioxide equivalent emissions.

                                    EXPERIMENTAL STUDY ON WASTE HEAT RECOVERY FROM AN …

                                     · PDF file

                                    Kumar, C. R., et al.: Experimental Study on Waste Heat Recovery from an Internal … THERMAL SCIENCE, Year 2011, Vol. 15, No. 4, pp. 1011-1022 1011 EXPERIMENTAL STUDY ON WASTE HEAT RECOVERY FROM AN INTERNAL COMBUSTION ENGINE USING THERMOELECTRIC TECHNOLOGY by C. Ramesh KUMAR *, Ankit SONTHALIA, and Rahul GOEL

                                    • Authors: C Ramesh Kumar · Ankit Sonthalia · Rahul GoelAffiliation: Vit University

                                      Volume 2, Issue 12, June 2013 Review on Exhaust Gas Heat …

                                       · PDF file

                                      Possible methods to recover the waste heat from internal combustion engine and performance and emissions of the internal combustion engine. Waste heat recovery system is the best way to recover waste heat and saving the fuel. Keywords – Efficiency, Emission, Waste heat from I. C. Engine, Waste heat recovery system for I. C. Engine

                                      Waste Heat Recovery Symposium – SAE International

                                      Most experts agree that internal combustion engines will be a major propulsion option in the foreseen future, with massive penetration of hybrid vehicles to global markets. The Waste Heat Recovery Symposium showcases these experts’ advances.

                                      Dynamic model of supercritical Organic Rankine Cycle waste …

                                       · PDF file

                                      based waste heat recovery system using transient heat sources from an internal combustion engine has not been investigated before. In this work, the dynamic model of the evaporator and its stability and transient responses are investigated at supercritical pressure. The model is then integrated with other components of the

                                      Dynamic model of supercritical Organic Rankine Cycle waste …

                                       · PDF file

                                      based waste heat recovery system using transient heat sources from an internal combustion engine has not been investigated before. In this work, the dynamic model of the evaporator and its stability and transient responses are investigated at supercritical pressure. The model is then integrated with other components of the

                                      • Cited by: 6

Need more information?

Contact us for more details about our boilers, solutions and services.

Gas-fired(oil-fired) boilers
Coal-fired boilers
Biomass-fired boilers
Thermal fluid heaters
Hot water/oil
0.7-14 MW
14.1-21 MW
21.1-29 MW
29.1-75 MW
Steam
1-10 t/h
11-20 t/h
21-90 t/h
91-140 t/h